A 8-foot wall framed at 24" on-center requires 5 vertical studs — or 6 studs with a standard 10% waste factor for warped boards. Add 3 plate boards (1 bottom + 2 top plates) for a total of 9 2×4 boards to pull. Common for non-load-bearing partition walls and advanced framing projects. Adjust corners, plates, and waste below.
Enter your wall length to get a complete 2×4 framing takeoff — studs, plates, and waste. Built for contractors, useful for everyone.
Wall Length
Stud Spacing
24" OC is used for non-load-bearing walls and advanced framing to save material.
Wall Diagram
Options
Corners & Intersections
+2 studs each for nailing surface
Waste Factor
Cost Estimator (optional)
Doing a full addition takeoff?
Our AI app can scan a 2D floor plan or a 3D room and generate a complete lumber package — including headers, jacks, and cripples — in seconds.
Stud Count
2×4 studs to buy (with 10% waste)
6
24" on-center
Plates
1 bottom plate + 2 top plates
Hanging drywall next?
Calculate Sheetrock sheets, mud, and tape. →
Suparate AI
Point your phone at a floor plan or walk through the space. Suparate AI generates a complete lumber package — studs, headers, jacks, cripples, and plates — automatically.
Need a different wall length? Use the full calculator.
← Back to Wall Stud Calculator