Enter your room dimensions to get a complete material takeoff — sheets, mud, tape, and screws. Built for contractors, useful for everyone.
Room Dimensions
Room Diagram
Sheet Size
Openings (deductions)
Doors
−20 sq ft each
Windows
−15 sq ft each
Total deduction: 50 sq ft
Waste Factor
Cost Estimator (optional)
Stop wrestling with a tape measure.
Our AI app uses your phone's camera to map out the entire room, automatically detecting windows and outlets. It builds this material list while you walk through the house.
Enter room dimensions to see your material list.
Suparate AI
Point your phone at the room. Suparate AI detects walls, windows, outlets, and doors automatically — then generates the full material list and cost estimate for your bid.
The finish level you target directly impacts your mud and labor costs. Most remodelers aim for Level 4.
Basic Tape
Tape embedded in compound, excess wiped. No topping coat. For areas that will be concealed above ceilings or in service corridors.
Single Coat
Tape plus one coat over tape and fasteners. Used in garages, warehouses, and storage spaces where appearance is secondary.
Two Coats
Tape plus two coats over tape and fasteners. Suitable when heavy texture (skip trowel, orange peel) will be applied.
Three Coats
Tape plus three coats, lightly sanded. The standard for most homes and commercial spaces with flat or light paint finishes.
Skim Coat
Level 4 plus a thin skim coat over the entire surface. Required where glossy paint or critical lighting will expose every imperfection.