Roof replacement in Wyoming runs $395–$660 per roofing square (100 sqft installed) in 2026 (12% below the US average). Use the calculator below to estimate squares and bundles for your roof, then apply these local rates for a full cost estimate.
2026 Installed Costs — Wyoming (WY)
Per Roofing Square
$395–$660
architectural shingles, mat + labor
vs. US Average
12% ↓
National avg: $450–$750/square
Climate Note
High wind is a major structural concern in exposed Wyoming areas (Cheyenne is one of the windiest cities in the US); heavy snow loads in mountain areas.
Roof Area (flat / plan measurement)
Roof Pitch
Shingle Type
Price per Bundle
Waste Factor
15%Results
Enter roof area to calculate
Suparate
Turn this into a professional estimate
Add labor, markup, and send a signed proposal from your phone.
Try Suparate FreeDesign for wind exposure on all Wyoming exterior projects
Wyoming's wind (especially in the Laramie Basin and Cheyenne area) is among the strongest in the lower 48. Fence panels must be designed with wind uplift bracing; deck railings need hurricane-tie connections; roofing must meet high-wind ratings. Ignoring wind exposure in Wyoming leads to structural failures and warranty claims.
Roofing replacement (architectural shingles, materials + labor) in Wyoming runs $395–$660 per roofing square (100 sqft) in 2026. The US average is $450–$750/square. High wind is a major structural concern in exposed Wyoming areas (Cheyenne is one of the windiest cities in the US); heavy snow loads in mountain areas.
The average single-story home in the US has a roof of 1,500–2,500 sqft of flat (plan) area, which translates to 15–25 roofing squares before pitch adjustment. At Wyoming's rate of $395–$660/square, a typical roof replacement runs $6,715–$14,520 for a 1,700–2,200 sqft home.
Wyoming roofing costs are 12% below the US average in 2026. Use the calculator above to estimate exact squares and bundle counts for your roof dimensions, then apply these local rates for a complete cost estimate.
Calculate exact squares and bundles for your roof dimensions.
← Back to Roofing Calculator