Fence installation in Montana runs $27–$54/LF for a 6 ft cedar privacy fence (materials + labor) in 2026 (10% below the US average). Use the calculator below to estimate posts, rails, and pickets, then apply these local rates for your full budget.
2026 Installed Costs — Montana (MT)
6 ft Privacy Fence
$27–$54
per linear foot, cedar, mat + labor
vs. US Average
10% ↓
National avg: $30–$60/LF
Local Note
Cedar holds up well in Montana's dry conditions; vinyl is growing in Billings and Missoula suburbs.
Total Fence Length (linear feet)
Fence Height
Post Spacing
$ / Picket
$ / Post
$ / Rail
Waste Factor
10%Results
Enter fence length to calculate
Suparate
Turn this into a professional estimate
Add labor, markup, and send a signed proposal from your phone.
Try Suparate FreeConfirm local snow load requirements before Montana roofing layovers
Montana building codes vary significantly by county and elevation. A roofing structural assessment ($300–$500) before adding a second shingle layer is required by code in most Montana jurisdictions — and it's your liability protection if the roof later shows stress.
Fence installation in Montana runs $27–$54 per linear foot for a 6 ft cedar privacy fence (materials + labor) in 2026. A 150 LF fence costs approximately $4,050–$8,100. Cedar holds up well in Montana's dry conditions; vinyl is growing in Billings and Missoula suburbs.
Cedar privacy fencing is the most popular residential fence style in Montana. Vinyl fencing (10–20% more expensive than cedar) is growing in HOA communities. Pressure-treated pine is the most economical option. Chain link runs $10–$20/LF and is common for utility and pet enclosure applications.
Montana fence installation costs are 10% below the US average in 2026. Use the calculator above to estimate posts, rails, and pickets for your fence length, then apply these local rates for a full project budget.
Calculate posts, rails, and pickets for your specific fence length.
← Back to Fence Calculator